Log to root account
I'm using Mainline 4.9.5 for cubieboard2 (Armbian_5.24_Cubieboard2_Debian_jessie_next_4.9.5.7z). I boot without LAN or WIFI dongle using TTL port to get console interface. When I try to log how root (...
View Articlereboot and halt cmd on Cubietruck 3
Hi, I use a Cubietruck 3 and the last Debian "Armbian_5.25_Cubietruck_Debian_jessie_default_3.4.113". 1° When i'm sart for the first time, It's impossible to reboot or halt the cubietruck. The led...
View ArticleJessie Upgrade-log Issues
I'm currently running ARMBIAN Debian GNU/Linux 8 (jessie) 4.9.7-sunxi on my CT. On my last apt-get upgrade I noticed this line reoccurring in log: > dpkg: warning: unable to delete old directory...
View ArticleCubietruck no firstrun?
Hi, i try to install Mainline 4.9.7 Ubuntu Xenial on cubietruck. After first boot, it ends directly in prompt cubietruck login: First start takes about 40 seconds, no ssh keys, no reboot. I think...
View Articlecubietruck - no next image works - CRC =>pxeboot
Hi all, special thanks to Igor for his work and all who are involved, thank you for reading this, THE MISSION: I am trying to install Armbian 5.25 Cubietruck Ubuntu xenial onto a cubietruck...
View Articlehostapd fails to start after upgrade from armbian repo
Hello, on my cubietruck, I tried to upgrade a working hostpad install with the one provided by the armbian repository. After upgrade, hostapd fails to start. Is there any particular prerequisite to...
View ArticleHow to disable bluetooth and wlan on cubietruck?
I use Mainline 4.9.7 Ubuntu Xenial and wan`t to disable wlan and bluetooth, cause i don`t need. Where can i do this?
View ArticleBPi-R1 with new B53 switch driver (DSA)
After reading from June '16 until February '17 I think it makes sense to start at the last steps /improvements. I've been using the 5.24 nightly builds for a while (now I'm back on the 5.25 main...
View ArticleCan't set custom MAC address for eth0
Hi, tried to set custom MAC in script.bin (dynamic section) and in armbianEnv.txt (ethaddr=XX:XX:XX:XX:XX:XX) but without success. I'm on armbian 5.25 cubietruck legacy xenial. Any help?
View ArticleCubietruck Error after boot
I got following error after boot mainline: brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) brcmfmac: brcmf_p2p_create_p2pdev_timeout occured brcmfmac: brcmf_cfg80211_add_iface:...
View ArticleCubieboard A20 2012 version does not boot with Armbian 5.25!
Hi everybody. My cubieboard does not boot with Armbian 5.25. Does anyone know what is the problem? I really thank you beforehand. Actually i turns off after a second! U-Boot SPL 2017.01-armbian (Feb...
View ArticleCubieTruck: File not found /boot/boot.bmp
Hi there, Armbian with 3.4.x Kernel has been running fine on my CubieTruck until upgrading to 5.25. Armbian is installed on NAND (using nand-sata-install), and there is also a SDcard and a harddrive...
View ArticleBanana pro I2S in mainline
Hi... Sorry if this has already answered... I want to know how activate the I2S interface in the latest vanilla image... In the past using the legacy kernel only need to change a few thing in the fex...
View ArticleClik here to view.
LIME2 rev.G won't boot Armbian 5.25 if HDMI is connected
Hi, I've tested more than 10 pcs of Lime2 rev. G and those that I received from Olimex in last supply (Jan 2017) has strange behavior, all of them. It won't boot if HDMI connector is plugged in...
View ArticlePcDuino 3 - Can't boot from nand
Hello ! I have a pcduino 3 with 4gb nand memory. I tried to install armbian server with Kernel Legacy 3.4.113. The SDcard boot works well but when i try to boot from nand just after nand-sata-install,...
View ArticleBattery management via AXP209 (Banana Pi/Pro)
So I have a question... I'd like to manage Li-Ion battery operation on SBCs using the AXP209 power management chip (especially the Banana Pro, as that's what I have...)I soldered a connector to the...
View ArticleClik here to view.
Boot to wait until a network connection is established
I have problem with transmission-deamon on my CubieA20. It not starting listening on boot. Only after service restart. Met same problem on Raspberry-3 but it cured by enabling "boot to wait until a...
View ArticleClik here to view.
Boot to wait until a network connection is established [solved]
I have problem with transmission-deamon on my CubieA20. It not starting listening on boot. Only after service restart. Met same problem on Raspberry-3 but it cured by enabling "boot to wait until a...
View ArticleMMC error crashes on Banana Pro - EDIT: still unsolved
Like whaaaaaa... Okay, so long and frustrating story short, I have been having inexplicable stability issues on my Banana Pro. I have blamed the SD card, the power supply, the micro USB cable, but none...
View ArticleQuestion about frequencies with Banana Pi (A20)
Hi, No real problem, just a question. I'm using latest Armbian Jessie 5.25 with my good old Banana Pi. root@marvin:~# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 144000...
View Article