Banana Pi overclocking and MTU setting
hi, since 2 days i am using on my Banana Pi the Debian Jessie with 4.8.15 Kernel with installed Openmediavault 3. The system is working stable, but the network-performance is less then my older...
View ArticleBanana Pi overclocking and MTU setting
hi, since 2 days i am using on my Banana Pi the Debian Jessie with 4.8.15 Kernel with installed Openmediavault 3. The system is working stable, but the network-performance is less then my older...
View ArticleCUBIETRUCK WIFI BUG
Hi, I run a Linux Armbian_5.24_Cubietruck_Debian_jessie_4.8.15 on a Cubietruck with the kernel on version 4.8.15-sunxi. When i want to enable the wifi module, this don't work. I have see a...
View ArticleClik here to view.
[Cubox-i] Unable to boot latest test images with kernel 4.9.5
Just wondering if anyone has booted the latest cubox-i test images with kernel 4.9.5 ? I tried the last couple of days with no joy; however I have not got around to full logs / troubleshooting. It...
View ArticleCustom speed on ttyS1
I need to use non-standard baud rate (125000) on the serial port. Communication works very reliably, but dmesg says: "Python sets custom speed on ttyS1. This is deprecated." What should my attitude...
View ArticleOlinuxino Lime2 no Ethernet since new revision G
Hello, I received a few weeks ago some new Lime2 boards. Using compiled Armbian kernel leads to a network problem: no IP is set and network does not work I have messages when connecting Ethernet...
View ArticleU-Boot compilation: can't make Ethernet work on A20-OLinuXino-Lime2 since new...
Hello, I received a few weeks ago some new Lime2 boards. Using compiled Armbian kernel leads to a network problem: no IP is set and network does not work I have messages when connecting Ethernet...
View ArticleMerrii Hummingbird A20 Unable to handle kernel paging request at virtual...
Starting kernel ... <6>Booting Linux on physical CPU 0 <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 3.4.113-sun7i (root@vultr.guest)...
View Article[SOLVED] can't make Ethernet work on A20-OLinuXino-Lime2 since new revision G
Hello, I received a few weeks ago some new Lime2 boards. Using compiled Armbian kernel leads to a network problem: no IP is set and network does not work I have messages when connecting Ethernet...
View ArticleUnable to change scaling_available_frequencies
Hi all. I have a Banana Pi M1+ and I want to use it as a NAS using a SATA HDD (1TB). I read this article http://linux-sunxi.org/Cpufreq#Performance.2Ffunctionality_impacts and I want to change the...
View ArticleBanana Pro SATA
sata port does not work, seeing the following error in dmesg [ 3.901254] ahci-sunxi 1c18000.sata: PHY power up failed. [ 3.901313] ahci-sunxi: probe of 1c18000.sata failed with error -5 $ uname...
View ArticleConsole output while booting
Hello, I'm running a freshly installed armbian with mainline kernel 4.9.5 on my cubietruck. Between u-boot messages and login prompt I don't get any output while booting. I've tried several...
View ArticleSound out via HDMI
Hi all, I need a help. I installed the armbian Debian Jessie 4.9.5 in my cubietruck. It is connected via HDMI. How do I set the output of sound to be HDMI? Thanks and best regards
View Articlehostapd fails to start after upgrade from armbian repo
Hello, on my cubietruck, I tried to upgrade a working hostpad install with the one provided by the armbian repository. After upgrade, hostapd fails to start. Is there any particular prerequisite to...
View ArticleEth not going down after cable disconnected?
hi, I'd like to ask regarding the behavior of eht: I want to use eth wire connection as primary ISP connection and wireless connection (using wifi dongle, different network) as backup ISP connection....
View ArticleCubieboard1 problem running from nand <fs mount fail, jump to fel>
Hi to all, I have a Cubieboard1 and it seems it can't boot from nand after running nand-sata-install script. The output I get through ttl is: HELLO! BOOT0 is starting! boot0 version : 1.5.1 dram size...
View ArticleKernel sources 3.4.113 with Mali400MP drivers
Hi. I'm looking for your kernel sources 3.4.113 with Mali400Mp driver. Is there a repo where I can download it or I have to patch myself the sunxi-v3.4.104-r0 kernel. In case there is no repo and I...
View ArticleThinking about swapping Archlinux for Debian in my Cubox-i4
Hi guys. I wanna ditch archlinux because its continuos issues with Kodi and uwsgi. Does Debian for arm play good with Kodi? Is there any major issue besides the network speed? Thanks!
View ArticleAfter upgrade, OMV can not be installed
Nach dem upgrade kann OMV nicht installiert werden Hallo an Alle Seit gestern geht das Installieren von Openmediavault nicht und zwar auf Armbian 4.8.4 und 4.9.5 Wenn ich Update friert das ganze...
View ArticleMerrii Hummingbird A20 Unable to handle kernel paging request at virtual...
Starting kernel ... <6>Booting Linux on physical CPU 0 <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 3.4.113-sun7i (root@vultr.guest)...
View Article