Cubietruck: normally Watchdog works, but now it failed
My Cubie crashed after 3-4 weeks and I installed Watchdog using the file change method. During my tests it works fine several times. But again after 3-4 weeks my Cubie was totally unavailable via SSH...
View ArticleImage build problem for Lime2
Hi! I try to build the image Lime2_Ubuntu_trusty_3.4.111 for Lime2 from Armbian repository. For this process I use this documentation - http://www.armbian.com/using-armbian-tools/ After success finish...
View ArticleCubietruck boot error with any self compiled image
Dear all, After having problems with the 5.04 armbian and kernel 4.4.3 I went ober to build my own image. Prepared an ubuntu 14.04 and built jessie image, xenial image, with the 3.x and 4.x kernel....
View ArticleClik here to view.
r1 ipv6 confusion by default
hi there, just created the account to report what i experienced with my r1. unfortunately i had a bunch of changes w/o reboot so i only can estimate what caused the gap but im pretty sure it was at...
View Articlelibvdpau-sunxi in mainline kernel
Is there any way I can make use of the VDPAU implementation for A20 with the mainline kernel? Or will I have to use the old 3.4 kernel? Thanks Paul
View ArticleThe Armbian status for Banana Pi M1 Plus
I've tried the current armbian release legacy & vanilla with my bpi m1+ board. and it looks like it's still have some distance away from an idea linux enviroment . The legacy version I've...
View Articleolimexino micro jessie 3.4.110-sun7i kernel hdmi problem
on my a20 olimex micro board with armbian 5.0 (jessie) and 3.4.110-sun7i kernel hdmi shutdown after boot (i can see bootloader and logo) with armbian 4.5 image for lime2 hdmi works, but eth0 not...
View ArticleClik here to view.
Banana Pi Connect I2C Display and other
Hi! Anyone use display? GND: Shared VCC: Power supply SDA: Bus Information SCL: clock data bus From site: I am using this code for Vanilla kernel and with changed line: /dev/i2c-%u =...
View ArticleClik here to view.
Orange Pi 1: set size screen ? [solved]
Hi all, First, thanks to Igor for his job with Armbian: Scripts, compilations etc. Very apprecied so far. I own an Orange Pi 1 based on A20 SoC. Armbian kernel 4.1.1 is installed, no problem. (I...
View ArticleSATA down on Banana Pro w/ 4.5.2-sunxi
Updated this afternoon and noticed my SATA drive isn't connecting. > dmesg | grep SATA [ 3.633118] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32 [ 3.952927] ata1: SATA...
View ArticlePcDuino3 Nano image not booting
I downloaded: http://mirror.igorpecovnik.com/Armbian_5.10_Pcduino3nano_Debian_jessie_4.5.2_desktop.7z and burned it to an SD card, when I tried booting the board, all I get on the uart console is the...
View ArticleRS485 port on UART2
The hummingboard edge has a RS485 port on UART2? What would it take to get to get this running? The latest build does not have ttymxc1 enabled. And I think the driver for the RS485 is different...
View ArticleBanana pro. Why RTC battery not working?
Hello. I soldered CR2032 battery to BAT1 on Banana pro board. Setup current date and time. But RTC not working. :-( When I restart the board I see old date and time. Please tell me, how can I turn on RTC?
View ArticleBanana Pi M1 GMAC won´t work with AppleTalk
Hi to all, i´d try to setup a Banana PI M1 as AppleTalk Printserver because my old LaserWriter 4/600 only got a LocalTalk Interface. But the Kernel didn´t support AppleTalk, i compiled it in myself...
View ArticleCompiling SDL2 on the Hummingoard
Hey guys, since noone seems to care at the solid-run forum, I ask here. I would like to compile SDL2 with opengles and vivante support. I've installed the drivers from this post...
View ArticleLime 2 serial console on armbian (getty)
Hi, is it possible to have the serial/UART on the Olimex LIME2 to work as a serial console on Armbian Jessie (kernel version 4.5.2)? The UART is already working during early boot, but once kernel is...
View ArticleClik here to view.
No sound card / audio capabilities in Olimex Lime (A10)
Hi guys, I am very sorry to bother you, I tried everything I could to make this work but unfortunately, I can't figure it out. So here I am asking for help ! I am using the Armbian 4.5 Jessie...
View ArticleBanana Pi R1 - WAN port - LED link problem
LED link on WAN port ON when disconnect cable link ( not change to OFF, always ON). Help me how to fix the problem
View ArticlePatches for M1+ dts file for wifi
root@x1c:/tmp# diff -u m1plus.dts.orig m1plus.dts --- m1plus.dts.orig 2016-05-07 17:52:38.000000000 +0200 +++ m1plus.dts 2016-05-07 18:16:36.000000000 +0200 @@ -704,6 +704,13 @@ bus-width =...
View Articleupdate lost 30-sysinfo motd
Lost the login motd following apt-get upgrade. Start-Date: 2016-05-08 10:52:11 Commandline: apt-get upgrade Upgrade: linux-image-next-sunxi:armhf (5.04, 5.10), linux-headers-next-sunxi:armhf (5.04,...
View Article