root@x1c:/tmp# diff -u m1plus.dts.orig m1plus.dts
--- m1plus.dts.orig 2016-05-07 17:52:38.000000000 +0200
+++ m1plus.dts 2016-05-07 18:16:36.000000000 +0200
@@ -704,6 +704,13 @@
bus-width = <0x4>;
non-removable;
enable-sdio-wakeup;
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <0x3a>;
+ interrupts = <7 15 0x00000008>; /* PH15 / EINT15 */
+ interrupt-names = "host-wake";
+ };
};
usb@01c13000 {
@@ -1081,7 +1088,7 @@
allwinner,pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9";
allwinner,function = "mmc3";
allwinner,drive = <0x2>;
- allwinner,pull = <0x0>;
+ allwinner,pull = <0x1>;
linux,phandle = <0x25>;
phandle = <0x25>;
};
the Armbian_5.10_Bananapipro_Debian_jessie_4.5.2 install doesn't make my M1+'s wifi usable.
first, I use dtb -I dtb -O dts to get the m1-plus's dts source file. and then apply this patch. after apply this patch, my M1+ board's wifi is working well:
root@bananapi:/home/luoyi# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 02:48:0a:81:ca:65 brd ff:ff:ff:ff:ff:ff
3: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 52:e1:7f:c0:a1:08 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 98:3b:16:c7:cd:81 brd ff:ff:ff:ff:ff:ff
inet 172.16.100.149/24 brd 172.16.100.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::9a3b:16ff:fec7:cd81/64 scope link
valid_lft forever preferred_lft forever
root@bananapi:/home/luoyi# uname -a
Linux bananapi 4.5.2-sunxi #11 SMP Thu Apr 28 21:53:25 CEST 2016 armv7l GNU/Linux
root@bananapi:/home/luoyi# dmesg |grep -i mach
[ 0.000000] Machine model: Banana Pi BPI-M1-Plus