banana pi m1 configure smplayer
bananapi m1 armbian 5.20 configure smplayer acelered ? thanks
View ArticleBanana Pi R1 UART3 CTS/RTS and DTB
Dear All, I am just trying to figure how to enable the UART3 to be a 4 wire serial port for Lamobo R1 board. As per the datasheet here,...
View ArticleMotd storage not getting updated
Hey guys, I have a Banana Pro and recently switched to Armbian from Bananian. I boot from an HDD connected to the SATA port on bpi. Apparently the root fs is supposed to get resized to the max...
View ArticleEnabling usb otg on banana pi m1 A20
Hi All, I'm trying to get usb otg enabled as host mode to add, for instance, a keyboard with a powered hub (I know otg is not delivering power or at least I don't want to drain more power with the otg)...
View ArticleSPI0 on cubietruck
Hi I want to use SPI0 with cubietruck. SPI2 works. However I failed with SPI0. What needs to be done (in script.fex, kernel, etc) to get it work?
View Articleproblem when last step mkimage on banana pi m1 plus
I got a banana pi plus like the one this web page https://www.armbian.com/banana-pi-plus/ and downloaded legacy jessie server on it. After applied the last step on the page： sed -i '1isetenv fdtfile...
View ArticleUSB OTG detection
Hello Everyone.. I am using Olimex A20 board in my project wherein I will be using USB OTG as Ethernet/ LAN commuication with PC. The Ethernet/LAN communication is working properly. However, I am...
View ArticleFirefox crashes on Olinuxino-Lime A20
I'm trying to figure out why Firefox-esr crashes form time to time on my Olinuxino-Lime A20. I also have a Banana PI (also A20) and on that board Firefox never crashes. On both boards I use the legacy...
View Articlelinux usb server
where can i find de virtual Linux usb server for my orange pi pc and armbian 5.2? i download jessie desktop regards Tex
View Article[BananaPi] Vanilla/Next kernel run A20 at 1008MHz?
I know the A20 isn't really build for OC, but I would still like to do some tests with it running at 1008Mhz. As far as I understand Kernel 4.X doesn't use the fex files anymore, but rely on the dts...
View Articledpms force off doesn't work
Hi Friends, on Banian I was using "xset dmps force off" and "xset dpms force on" to switch display off and on as I need it. Tryed to use this commands in terminal with armbian but nothing happens....
View Article[Lime2] NAND boot fails: mbr magic is not correct after nand-sata-install
On an Olimex Lime2 NAND 4GB I installed Armbian legacy debian jessie server on an sd-card. "lime2 3.4.112-sun7i #10 SMP PREEMPT Sun Oct 23 15:49:51 CEST 2016 armv7l" I followed:...
View ArticleProblem enablig tty5 and tty6 on cubieboard2 with kernel 4.7.3 using DTB
Hi, in the last weeks I'been trying to use the serial ports 5 and 6 (tty5, tty6) of the cubieboard2 using DTB but still not working. First of all, I must said that i'm not a linux expert, only a...
View ArticleBanana PI M1 freeze compiling headers
Hi everyone, im playing quite a while with my BP and OMV simplenas Images. for perfomance reasons i decided to test armbian but i have some trouble with it. I prepare the SD boot them up change my...
View ArticleBanana Pi M1+ and BPi 7 inch LCD (S070WV20-CT16)
Hi, has anyone been able to use the BPi 7 inch LCD (S070WV20-CT16) with Banana Pi M1+? I took the FEX file from this how-to:...
View ArticleA20 PWM problem pins "HIGH" on boot
Hello dear mates, first I want to thank zador.blood.stained for helping out with recompiling the DTB for A20 so we can enable PWM on Armbian. Link to his post...
View ArticleClik here to view.
TBS2910 - My favorite, forgotten board
A couple years back a company named TBS, mostly known for their DTV hardware, released a mini PC styled thing. It's called the TBS2910 Matrix and was marketed mostly as a Kodi box. Sadly it doesn't...
View ArticleHow to disable boot output to uart0?
Hi guys, I tried to disable console output on uart0 using this guide https://docs.armbian.com/User-Guide_Fine-Tuning/#how-to-toggle-boot-output But I still get boot output on uart0. Problem is,...
View ArticleKernel boot arguments
Hi. I have Cubieboard 1 with Armbian Jessie installed on NAND. I've tried to disable output during boot as described here: https://docs.armbian.com/User-Guide_Fine-Tuning/#how-to-toggle-boot-output,...
View ArticleNo package updates
Hi! Is it only me or there are no updates to packages? Let me explain, I'm running jessie server on A20 latest stable kernel and when I run apt-get update, apt-get upgrade there are never updates...
View Article