how does one turn on the LIME2?
Hello, I have the LIME2 board from Olimex (A20 SoC). I tried writing the image Armbian_5.20_Lime2_Debian_jessie_4.7.3_desktop to an SD card with dd. However, nothing happens when I plug in power...
View ArticleTime to play with Pi 3 also, what image to use?
Hi All, time ti work and play with Pii also, at time i am using Raspberry Pi 3 Model B, what Image to use to get started over? Regards && thx
View ArticleCubox i4-pro low upload speed
Hi, I have used ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-cubox the upload speed was horrible about 2,5 Mbytes/s Now I switched the kernel to vanilla ARMBIAN Debian GNU/Linux 8 (jessie) 4.8.4-cubox...
View ArticleConnectCore6 Single Board - debian-based os linux support
Hi, I have Connected i.MX6 Single Board Computer. https://dl.dropboxusercontent.com/u/6943408/ConnectCore/DSCF0496.JPG I need to boot Debian-based system from SD card. I tried a lot of images -...
View ArticleCubietruck on Vanilla - NAND? Error messages
Hey there, after quite a while laying around in a box my Cubietruck finally came to life again. I downloaded the latest Xenial Vanilla Server from http://www.armbian.com/cubietruck/and set it all up....
View ArticleBooting A10-Lime with serial and Ethernet hangs
Maybe this is a faq. After installing and upgrading armbian to 5.23 on A10-Lime, if I leave serial console attached and Ethernet Cable attached, booting process hangs at: Uncompressing Linux......
View ArticleWhich image for bananapi pro : ubuntu xenial or debian jessie ?
Hello, With a bananapi pro, which legacy image is better to use ? ubuntu xenial or debian jessie ? I intend to use it mainly as a server and occasionally to watch movie on a hdmi screen. I do not want...
View Article/dev/i2c-2 and /dev/i2c-3 (on UEXT) on A10 Lime
Hi, I have installed armbian 5.23 on an olimex A10 lime. After boot I find that the i2c devices on the UEXT interface do not show in /dev. They should be /dev/i2c-2 and /dev/i2c-3 and should be...
View ArticleCubietruck freeze after 1-3 days with 5.23 Xenial (uboot problem?)
Hey, after making sure that all packages are current (armbianmobitor upload available at http://sprunge.us/Migh)I still have the problem currently that my three cubietruicks freeze after working 1-3...
View ArticleSuggestion for 30-sysinfo
Hi I have a suggestion to modify update-mot.d script 30-sysinfo. It reports battery chargin or not depending on percentage (if <100% then is charging): # Battery info for Allwinner # kernel 4.4+...
View Articlewhich armbian version - 5.20 or 5.23 ?
Hi: I am confused. The current armbian for cubietruck is still:Armbian_5.20_Cubietruck_Debian_jessie_3.4.112_desktop-2.7z but on the download page it states that version 5.23 is the latest version....
View ArticleJust say hello to everbody XU4-beginner
Just using ubuntu and want to change to ambian ASAP
View ArticleSPI on Cubietruck
Hello! I'm trying to get SPI working with Armbian on Cubietruck. Armbian 5.20 Debian Jessie I edited fex, enabled spi as here https://linux-sunxi.org/SPIdev#Configuring_your_FEXbut no spidev device...
View ArticleDriver for ksz8863
Hi, there is a question as selected to install the driver on the linux-3.4.112-sun7i ? I am a beginner and also sorry for my english.
View ArticleCannot ping host cubieboard1
Hi. I've installed Xenian Server on cubieboard1. Host connected to LAN/Internet. I can do apt-get update/install, but I cannot ping the host inside LAN (time out). May be the reason any fw rules on...
View ArticleUSBTV driver
Hi I would like to add usbtv driver (STK1160) to the kernel, but I don't know how to use this information: https://www.olimex.com/wiki/STK1160-howto-linux-sunxi-3_4 Together with the Armbian repo...
View ArticleBanana Pu and BananaPI Pro system boot
Hi, I'd like to setup mySql and web server on Banana PI board and sata hard disk. Since I have read from documentation it is possible to boot banana pi board from sd card and system from sata...
View ArticleLirc not working on Cubieboard2
I tried to let learn from lirc. root@cubieboard2:/etc# irrecord --driver=default --device=/dev/lirc0 /etc/lircd.conf irrecord - application for recording IR-codes for usage with lirc Copyright (C)...
View ArticleBanana Pi server enable gpu
Hello there. I am using ubuntu Xenial server on Banana pi. It has mysql, nginx, websites, and many programs and settings. I use it as a banana pi router. I used to use it as a server until now but now...
View Articleopnemediavault iscsi target plugin
I can not install the plugin because of the missing of linux-headers-4.8.4sunxi Did anyone tried to instll this on a banana pi pro
View Article