Clik here to view.
PPS-GPIO
Hello Forum, please excuse my bad English. I try setting up a stratum1-server. Based on GPS. For this I use the Banana Pi with kernel 4.6.2 and the Adafruit GPS. The GPS is connected to GPIO J12...
View ArticleClik here to view.
Cubieboard 3 Newbie
Hi all First of all Ciao to all the members of this forum!! I'm just moving from RPi to CB3, all new for me. I've booted up with latest version of Armbian...
View Articlestrange pwm on Lime2 3.4.112
Hello, Me, again !! I used pwm on Lime2 with 3.4.109 and works fine (generating sounds with 2-3 Khz) But, with 3.4.112, I have sound up to 363 Hz. Beginning with 364 Hz ... no sound !! I verified...
View Articlecubietruck: tvin (sun7i_tvd)
have anyone tested the tvin yet? there are some ported drivers from android kernel on github (sun7i_tvd). with regards
View ArticleCubietruck g_mass_storage jessie 3.4.112
Hi Forum, "modprobe g_mass_storage file=/dev/sda1 removable=yes stall=0" doesn't work on 3.4.112 but works on 4.6.2. [ 363.575922] [sw_udc]: [sw_usb_udc]: binding gadget driver 'g_mass_storage' [...
View Article[Thank you] big thank you @all from a cubietruck newbie
Hello list, a big thank you to all the developers of Armbian. I am a newbie to arm boards, have limited experience with various linuxes and definitely not enough know-how to progam anything or to...
View ArticleLatest Update - erase of bash.bashrc.custom
Hi, today I want to tell you, that I am very much upset about the result of the latest ARMBIAN Update! After updating I figured out, that the latest update erased my bash.bashrc.custom, which took...
View ArticleClik here to view.
128GB microSDXC card on Cubietruck
I'm thinking of getting a 128GB microSDXC card (Samsung EVO) for my Cubietruck. Is this likely to work or is 64GB a hard limit? Of course, I intend to put a sane filesystem on it, like ext4.
View ArticleClik here to view.
What image for Cubietruck?
Dear Forum, First of all thank you for being a member here. Second is that I would need some help on selecting an image for my present CT board. I need the followings: 1. hostapd with dnsmasq 2....
View ArticleStrange USB shutdown on Banana-Pi M1
Hello ! I recently reimaged my BPi M1 with the vanilla headless Debian Jessie from Armbian. But I have two problems: Main problem (the worst): I have a RAID SATA to USB enclosure (this one:...
View Articlerunning cubietruck from ssd - problem with /lib/modules/4.6.2 or 4.6.3
i run a cubietruck on armbian with 4.6.2 kernel. it starts with the software on mmcblk0p1 (with kernel 4.6.2 and the /lib dir on the sd) but uses as root a partition of the ssd. when i upgrade now, i...
View ArticleIssues with screen resolution
Hey everyone. I have an MK802 II stick, which has the A10 s.o.c, so i use the Olinuxino Lime a10 image on it. Everything works pretty much fine, except one little thing. This machine has worked fine...
View Articlekernel 4.6.3 on BPI Pro - Kernel panic and blocked network
Hello, with the update to the new kernel (4.6.3-sunxi) I get some problems on my banana pro. First, while the system starts I get sometimes a kernel panic. In the most cases the kernel will boot on...
View ArticleDesktop image of armbian 5.14
Hi! I love this Linux distribution, I have tried some months ago and had worked very well. Now, I want install armbian in a pdduino3b, I go to "downloads" select pcduino3, and I have two options:...
View ArticleR1 boot from SATA problem and solution with kernel upgrade
I'm using vanilla Ubuntu Xenial 16.04 from http://www.armbian.com/lamobo-r1/ When I follow the forum posts for copying everything to the SATA drive and updating /etc/fstab and /boot/boot.cmd the system...
View ArticleBPI-R1 Display out of range error
Hi! I just installed a fresh Armbian_5.14_Lamobo-r1_Debian_jessie_3.4.112 image to my R1. While booting, the system first shows about a page of boot-messages on the Display and then changes to a...
View ArticleNode-RED on Armbian Wheezy
Hi! I need some help in order to install Node-RED over Armbian Wheezy on Cubieboard1 can anyone give me help?
View ArticleArmbian_Cubieboard1(A10)_desktop with legacy kernel won't boot (just shuts...
I've installed Armbian_5.14_Cubieboard_Debian_jessie_3.4.112_desktop.7z and It initially worked. I tested video files playback (I think it was mpv player) and it worked smoothly, no video lag. After 4...
View ArticleClik here to view.
BPi Pro | WiFi seems active, but fails.
Hi all, Creating a DietPi image for BPi Pro based on ARMbian. I finally got a chance to test do_expand_rootfs() from /etc/init.d/firstrun. Now works with multiple partitions, thanks for doing that...
View ArticleCubieboard1(A10) boot problem (with some tests)...
Hello. Some facts: 1. Boot with image based on legacy kernel cause shutdown after some (less than 10) seconds after power on. 2. Boot with image based on vanilla kernel always ok. 3. If i try to boot...
View Article