Cubietruck: First boot > takes forever (5.04: kernel 4.4.3)
Hi all. Strange thing happens. I've tried to run a fresh installation of the 4.4.3 kernel version of armbian 5.04. The first boot takes forever (I gave up after 2 hours; a few times). It started and...
View ArticleCubieboard A10 as torrent server problem
Hello, I used my cubieboard A10 to make a torrentserver with armbian. I use armbian jessie with vanilla kernel. The rootfs is on a 16gb sandisk sd-card, the download folder is on a sata ssd. I...
View ArticleCompiling sysdig for 4.4.1-sunxi
Been trying to compile the handy sysdig util in armbian. Installed it with: apt-get install -t jessie-backports sysdig sysdig-dkms After the normal install that worked, but when running gave this...
View Articlecubieboad1 HDMI screen resolution
First, thank you Igor for the wonderful images! I have a cubieboard1 which I haven't played with for a long time. This week I found Armbian and decided to put it on my CB1. I have an HDMI-to-DVI...
View ArticleClik here to view.
Problem to build and boot Kernel 3.4.111
Hi to All, Today I try to re-build Armbian (with legacy kernel 3.4 and Debian Jessie) customized by me a week ago and get into trouble to buld and boot it. I am fixing also: BOOTBRANCH=v2015.10...
View ArticleIMX6/HB, Kernel 3.14.60
Hey, which kernel did you use for the provided Hummingboard image (wheezy)? Is it a self-patched linux-linaro or the latest from solidrun (linux-fslc)? My test tells me, that it is the one from...
View ArticleClik here to view.
Lamobo-R1 - LAN USB QF9700
Please, help me how to config Lamobo-R1 with Lan USB QF9700. I need eth0, eth1 with command ifconfig. a) Plug USB QF9700 and reboot : ifconfig show only eth0 with mac address as Lan USB QF9700 Remove...
View ArticleClik here to view.
HummingBoard-Pro - Armbian 5.00
Hello Igor, First, Thank You for all great work over Armbian ! I tried about all previous releases and they started over HDMI port normally with factory U-Boot 2013 ... Now Armbian 5.00 I tried all...
View ArticleBpi-R1 w/LamoboR1 and disk-activity green led - HELP
Hello, I just upgraded my system from 3.4.110 to the kernel 4.4.1 (Debian7) by Igor's script (Thanks Igor). But I have noticed that in this version of the kernel is no longer possible to set the green...
View ArticleCubieboard1 Vanilla 4.4.3 sound configuration
Hi, I've installed Armbian 5.0.4 Wheezy. I'm trying to configure the sound, but no success jme@cubieboard:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec],...
View ArticleOrange pi câmera gc2035 works fine with v4l2 applications
Hi, i discovered and solved incompatible gc2035 driver with some v4l2 applications. I made some modifications to the 3.4.39-02 kernel-lobo: gc2035: of 8fps to ~20fps eand improvements in the matter...
View ArticleClik here to view.
Graphical Su Issues - Legacy Trusty Desktop
Hey guys I'm setting up a Cubietruck with Armbian_5.04_Cubietruck_Ubuntu_trusty_3.4.110_desktop.zip, and I cannot mount any of my unmounted volumes. Installing gksu didn't fix it. Any tips?
View Articleinvalid cubietruck mac address
My cubietruck mac address which I am assuming is auto generated is invalid. Though one would think it should work, other software on routers will not accept the mac as valid, and thus I can not add...
View ArticleClik here to view.
Two small improvements on lime A10 jessie legacy image
Hi Igor and all, after running armbian on my A20 lime2 for a long time, I decided to switch to armbian on my A10 lime, too (from jessie with a eewiki-based self-compiled kernel). So far it works as...
View ArticleSCRIPT NAND-SATA-INSTALL.SH
Hello everyone! I have a Cubietruck Allwiner A20 with 8G sdcard with Armbian 5.04 Debian 8 ( Jessie ) 3.4.110 - sun7i . When you start Cubietruck with sdcard Connected , I run the script...
View Articlebuild for bananpi m1
Hello I have a bananapi m1 with armbian Linux bananapi 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux I need to add serial ports so I think I need to rebuild a kernel as described...
View ArticleClik here to view.
Orange Pi A20, no image after some minutes
I've tried both Armbian_5.00_Orangepi_Debian_jessie_4.4.1 and Armbian_5.00_Orangepi_Ubuntu_trusty_4.4.1_desktop (needs the Option "HWCursor" "off" in /etc/X11/xorg.conf). On both, after some...
View ArticleBanana PRO cant SSH
On a new installation cant access over SSH. Same on latest Armbian 5.04 Jassie and Wheezy. If I change the parameter UsePAM to no (in /etc/ssh/sshd_config), I can login via SSH. EDIT I fount the...
View Article[Solved]Where can I check out kernel source code
Where can I check out the linux kernel source code for Debian Wheezy 4.4.3 (/usr/src/linux, nothing more nothing less). The reason is that I had a Gentoo system running on Cubieboard 20 with an...
View ArticleClik here to view.
PMP support build-in or recompile?
Hi! Is PMP support build-in in newer armbian images? I installed ARMBIAN Debian GNU/Linux 8 (jessie) 4.4.3-sunxi on my banana pi. Or is a recompile still needed? With the default image i can see a...
View Article