Armbian Cubietruck Desktop does not start the graphical environment for Nand.
I downloaded the Armbian Legacy 5:10 Cubietruck Debian jessie 3.4.112 Desktop (http://mirror.igorpecovnik.com/Armbian_5.10_Cubietruck_Debian_jessie_3.4.112_desktop.7z) , I recorded the image on an SD card using a software called Rufus ( https://rufus.akeo.ie/ )
Insert the card into Cubietruck and Armbian starts and works perfectly !
Nand-sata-install.sh run the script to perform the copy of the card to nand , the same copy without any error and asks at the end off the Cubietruck and disconnect the SD card .
After disconnecting the SD card the Armbian does not start. However I rode the Nand and it meets all of the recorded files.
I wonder how to start the Cubietruck by nand perfectly?
Here the configuration of FSTAB file written in NAND my Cubietruck.
copy was performed using the script nand-sata-install.sh
Do not start by NAND
/dev/nand2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1
tmpfs /tmp tmpfs defaults,rw,nosuid 0 0
/var/swap none swap sw 0 0
/dev/nand1 /boot vfat defaults 0 0
Sorry I do not speak English , I'm using Google Translate !
But I thank the collaboration of all of the community !