Just downloaded armbian, but there is no wlan0.
Looks like there is some mess with driver versions...
Am I rigth?
Can you update img file?
Or I shell compile it by myself?
> ifconfig
bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 eth0 Link encap:Ethernet HWaddr 02:07:07:43:22:60
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 Interrupt:87 Base address:0xc000
eth1 Link encap:Ethernet HWaddr 02:07:07:43:22:60
inet6 addr: fe80::7:7ff:fe43:2260/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 ![B)]()
TX bytes:600 (600.0 ![B)]()
TX bytes:600 (600.0 Interrupt:117 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 ![B)]()
TX bytes:0 (0.0 > dmesg | grep 8192
[ 0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
[ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[ 9.692020] 8192cu: disagrees about version of symbol module_layout
> modprobe -v 8192cu
insmod /lib/modules/3.4.112-sun7i/kernel/net/wireless/8192cu.ko
modprobe: ERROR: could not insert '8192cu': Exec format error
>dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.112-sun7i (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #5 SMP PREEMPT Wed Sep 14 19:41:56 CEST 2016
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun7i
[ 0.000000] Memory Reserved:
[ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
[ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
[ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
[ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB)
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0a89440, node_mem_map d0000000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65024 pages, LIFO batch:15
[ 0.000000] Normal zone: 1008 pages used for memmap
[ 0.000000] Normal zone: 128016 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768
[ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 890044k/890044k available, 158532k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc09dfe90 (10080 kB)
[ 0.000000] .init : 0xc09e0000 - 0xc0a18040 ( 225 kB)
[ 0.000000] .data : 0xc0a1a000 - 0xc0a91d68 ( 480 kB)
[ 0.000000] .bss : 0xc0a91d8c - 0xc0c66f78 (1877 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:192
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] start_kernel(): bug: interrupts were enabled early
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.013301] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928)
[ 0.076003] pid_max: default: 32768 minimum: 301
[ 0.079658] Mount-cache hash table entries: 512
[ 0.083857] Initializing cgroup subsys cpuacct
[ 0.087176] Initializing cgroup subsys memory
[ 0.090598] Initializing cgroup subsys devices
[ 0.094033] Initializing cgroup subsys freezer
[ 0.097259] Initializing cgroup subsys blkio
[ 0.100932] Initializing cgroup subsys perf_event
[ 0.104511] CPU: Testing write buffer coherency: ok
[ 0.109714] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.116817] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[ 0.122358] Setting up static identity map for 0x40724978 - 0x407249d0
[ 0.239014] CPU1: Booted secondary processor
[ 0.297259] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.299266] Brought up 2 CPUs
[ 0.304576] SMP: Total of 2 processors activated (3640.52 BogoMIPS).
[ 0.307801] devtmpfs: initialized
[ 0.313508] dummy:
[ 0.317191] NET: Registered protocol family 16
[ 0.323533] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.331340] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.336153] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.339305] [ccu-inf] aw clock manager init
[ 0.341577] [ccu-inf] aw_ccu_init
[ 0.345547] [ccu-inf] script config pll3 to 297MHz
[ 0.349298] [ccu-inf] script config pll4 to 300MHz
[ 0.353045] [ccu-inf] script config pll6 to 600MHz
[ 0.356806] [ccu-inf] script config pll7 to 297MHz
[ 0.360553] [ccu-inf] script config pll8 to 336MHz
[ 0.363315] Init eGon pin module V2.0
[ 0.372772] bio: create slab <bio-0> at 0
[ 0.376354] sunxi_gpio driver init ver 1.3
[ 0.382205] gpiochip_add: registered GPIOs 1 to 25 on device: A1X_GPIO
[ 0.385370] SCSI subsystem initialized
[ 0.388226] libata version 3.00 loaded.
[ 0.392922] usbcore: registered new interface driver usbfs
[ 0.397256] usbcore: registered new interface driver hub
[ 0.401432] usbcore: registered new device driver usb
[ 0.404546] Linux media interface: v0.10
[ 0.408154] Linux video capture interface: v2.00
[ 0.413790] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.419230] Switching to clocksource arch_sys_counter
[ 0.421311] FS-Cache: Loaded
[ 0.423489] CacheFiles: Loaded
[ 0.433710] cfg80211: Calling CRDA to update world regulatory domain
[ 0.439762] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
[ 0.443544] [sw_hcd0]: usb host driver initialize........
[ 0.447632] [sw_udc]: udc_init: version 20080411
[ 0.451015] [sw_udc]: usb_vbase = 0xf1c13000
[ 0.454079] [sw_udc]: sram_vbase = 0xf1c00000
[ 0.457169] [sw_udc]: open_usb_clock
[ 0.482356] udc->driver is null, udc is need not stop
[ 0.486262] NET: Registered protocol family 2
[ 0.502800] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.509741] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.517296] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.524051] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.526256] TCP: reno registered
[ 0.531133] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.536484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.540074] NET: Registered protocol family 1
[ 0.545374] RPC: Registered named UNIX socket transport module.
[ 0.549035] RPC: Registered udp transport module.
[ 0.552692] RPC: Registered tcp transport module.
[ 0.558159] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.562748] Trying to unpack rootfs image as initramfs...
[ 0.810901] Freeing initrd memory: 3556K
[ 0.816436] audit: initializing netlink socket (disabled)
[ 0.820144] type=2000 audit(0.810:1): initialized
[ 0.824597] highmem bounce pool size: 64 pages
[ 0.836422] VFS: Disk quotas dquot_6.5.2
[ 0.841902] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.849276] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.854867] NFS: Registering the id_resolver key type
[ 0.859370] NTFS driver 2.1.30 [Flags: R/W].
[ 0.862679] fuse init (API version 7.18)
[ 0.867274] JFS: nTxBlock = 6981, nTxLock = 55850
[ 0.884773] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.889150] Btrfs loaded
[ 0.891968] msgmni has been set to 1217
[ 0.899641] alg: No test for stdrng (krng)
[ 0.906369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.909259] io scheduler noop registered
[ 0.912483] io scheduler deadline registered
[ 0.916221] io scheduler cfq registered (default)
[ 0.921060] sunxi disp driver loaded (/dev/disp api 1.0)
[ 0.926630] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.931256] [uart]: used uart info.: 0x05
[ 0.935974] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[ 0.962243] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[ 0.964831] console [ttyS0] enabled
[ 0.969705] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
[ 0.995932] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
[ 0.998522] G2D: drv_g2d_init
[ 1.003224] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
[ 1.006485] G2D: head:c9000000,tail:ca000000
[ 1.009824] G2D: Module initialized.major:250
[ 1.018977] brd: module loaded
[ 1.024978] loop: module loaded
[ 1.028328] [NAND] nand driver version: 0x2 0x9
[ 1.083383] Dev Sunxi softw311 nand magic does not match for MBR 1: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.089451] Dev Sunxi softw311 nand magic does not match for MBR 2: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.095470] Dev Sunxi softw311 nand magic does not match for MBR 3: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.101472] Dev Sunxi softw311 nand magic does not match for MBR 4: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.109219] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
[ 1.115242] Dev Sunxi softw411 nand magic does not match for MBR 1: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.123222] Dev Sunxi softw411 nand magic does not match for MBR 2: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.131171] Dev Sunxi softw411 nand magic does not match for MBR 3: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.139105] Dev Sunxi softw411 nand magic does not match for MBR 4: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[ 1.146840] Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not present.
[ 1.149915] nand: unknown partition table
[ 1.152365] [NAND]nand driver, ok.
[ 1.158743] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[ 1.163222] ahci: SSS flag set, parallel bus scan disabled
[ 1.170689] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.177584] sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc
[ 1.180988] scsi0 : sw_ahci_platform
[ 1.188254] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.192725] [spi-inf] Found 2 spi devices in config files
[ 1.199547] [spi-inf] boards num modalias max_spd_hz bus_num cs mode
[ 1.203318] [spi-inf] spi_board0 irq gpio not used
[ 1.210272] [spi-inf] 0 spidev 12000000 0 0 0x3
[ 1.214055] [spi-inf] spi_board1 irq gpio not used
[ 1.221009] [spi-inf] 1 spidev 12000000 2 0 0x0
[ 1.225193] [spi-inf] sun7i_spi_probe: sun7i spi probe
[ 1.229817] [spi-inf] sun7i_spi_probe: spi0 dma type: normal
[ 1.233416] [spi-inf] bus num = 0, spi used = 1
[ 1.237854] [spi-inf] sun7i_spi_probe: spi0 cs bitmap: 0x1
[ 1.246416] [spi-inf] sun7i_spi_set_mclk: spi0 source = sdram_pll_p, src_clk = 480000000, mclk 96000000
[ 1.252330] sun7i-spi sun7i-spi.0: master is unqueued, this is deprecated
[ 1.258460] [spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 3
[ 1.267240] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI0 with 2 Slaves at most
[ 1.276642] [spi-inf] sun7i_spi_probe: spi0 driver probe succeed, base f0518000, irq 42, dma_id_rx 24, dma_id_tx 24
[ 1.280595] [spi-inf] sun7i_spi_probe: sun7i spi probe
[ 1.285237] [spi-inf] sun7i_spi_probe: spi2 dma type: normal
[ 1.288811] [spi-inf] bus num = 2, spi used = 1
[ 1.293249] [spi-inf] sun7i_spi_probe: spi2 cs bitmap: 0x1
[ 1.301792] [spi-inf] sun7i_spi_set_mclk: spi2 source = sdram_pll_p, src_clk = 480000000, mclk 96000000
[ 1.307687] sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated
[ 1.313789] [spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 0
[ 1.322577] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI2 with 2 Slaves at most
[ 1.331977] [spi-inf] sun7i_spi_probe: spi2 driver probe succeed, base f051a000, irq 44, dma_id_rx 26, dma_id_tx 26
[ 1.338127] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 1.342900] Fixed MDIO Bus: probed
[ 1.346222] sunxi_emac Using mii phy on PortA
[ 1.360997] sunxi_emac Using MAC from SID: 02:07:07:43:22:60
[ 1.366506] gmac: use mac address from chipid
[ 1.370604] gmac: device MAC address 02:07:07:43:22:60
[ 1.376250] [gmac]: sun6i_gmac platform driver registration completed
[ 1.379510] PPP generic driver version 2.4.2
[ 1.383472] PPP BSD Compression module registered
[ 1.387478] PPP Deflate Compression module registered
[ 1.394745] PPP MPPE Compression module registered
[ 1.398155] NET: Registered protocol family 24
[ 1.404022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.409270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.411771] [sw-ehci1]: open clock
[ 1.434489] [sw-ehci1]: Set USB Power ON
[ 1.440928] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.447215] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[ 1.451614] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[ 1.473648] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[ 1.476274] ehci_irq: port change detect
[ 1.479500] hub 1-0:1.0: USB hub found
[ 1.482434] hub 1-0:1.0: 1 port detected
[ 1.485062] [sw-ohci1]: open clock
[ 1.511217] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.517482] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[ 1.521787] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[ 1.533669] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.586709] hub 2-0:1.0: USB hub found
[ 1.589617] hub 2-0:1.0: 1 port detected
[ 1.592291] [sw-ehci2]: open clock
[ 1.614968] [sw-ehci2]: Set USB Power ON
[ 1.621403] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.627657] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[ 1.632050] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[ 1.653647] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[ 1.656270] ehci_irq: port change detect
[ 1.659606] hub 3-0:1.0: USB hub found
[ 1.662532] hub 3-0:1.0: 1 port detected
[ 1.665163] [sw-ohci2]: open clock
[ 1.691305] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.697603] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[ 1.701903] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[ 1.766647] hub 4-0:1.0: USB hub found
[ 1.769541] hub 4-0:1.0: 1 port detected
[ 1.773819] Initializing USB Mass Storage driver...
[ 1.778931] usbcore: registered new interface driver usb-storage
[ 1.782502] USB Mass Storage support registered.
[ 1.787448] usbcore: registered new interface driver ums-alauda
[ 1.792450] usbcore: registered new interface driver ums-cypress
[ 1.797469] usbcore: registered new interface driver ums-datafab
[ 1.802654] usbcore: registered new interface driver ums_eneub6250
[ 1.807676] usbcore: registered new interface driver ums-freecom
[ 1.812588] usbcore: registered new interface driver ums-isd200
[ 1.818030] usb 1-1: new high-speed USB device number 2 using sw-ehci
[ 1.823074] usbcore: registered new interface driver ums-jumpshot
[ 1.827916] usbcore: registered new interface driver ums-karma
[ 1.833014] usbcore: registered new interface driver ums-onetouch
[ 1.838052] usbcore: registered new interface driver ums-realtek
[ 1.842975] usbcore: registered new interface driver ums-sddr09
[ 1.847905] usbcore: registered new interface driver ums-sddr55
[ 1.852741] usbcore: registered new interface driver ums-usbat
[ 1.857511] mousedev: PS/2 mouse device common for all mice
[ 1.863164] ===========================hv_keypad_init=====================
[ 1.866579] ========HV Inital ===================
[ 1.870504] tkey_fetch_sysconfig_para: tkey_unused.
[ 1.877770] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
[ 1.882861] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong!
[ 1.888170] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[ 1.890683] i2c /dev entries driver
[ 1.894505] config i2c gpio with gpio_config api
[ 1.900127] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[ 1.905970] axp_mfd 0-0034: AXP internal temperature monitoring enabled
[ 1.910617] i2c i2c-0: Invalid probe address 0x00
[ 1.913712] I2C: i2c-0: AW16XX I2C adapter
[ 1.917097] config i2c gpio with gpio_config api
[ 1.921097] i2c i2c-1: Invalid probe address 0x00
[ 1.924179] I2C: i2c-1: AW16XX I2C adapter
[ 1.927554] config i2c gpio with gpio_config api
[ 1.931506] i2c i2c-2: Invalid probe address 0x00
[ 1.934584] I2C: i2c-2: AW16XX I2C adapter
[ 1.937329] [cedar dev]: install start!!!
[ 1.940312] [cedar dev]: install end!!!
[ 1.943747] [tt]----- avs_dev driver load... ----
[ 1.947358] [tt]----- register iomem ----
[ 1.950157] Cannot reserve region for ccmu
[ 1.953839] [tt]--- avs_dev driver load ok!! -----
[ 1.955592] [ace_drv] start!!!
[ 1.957967] [ace_drv] init end!!!
[ 1.959635] [pa_drv] start!!!
[ 1.961927] [pa_drv] init end!!!
[ 1.964303] axp20_ldo1: 1300 mV
[ 1.969521] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[ 1.975270] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[ 1.977978] hub 1-1:1.0: USB hub found
[ 1.981163] hub 1-1:1.0: 4 ports detected
[ 1.986428] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[ 1.991636] axp20_buck2: 700 <--> 2275 mV at 1400 mV
[ 1.998225] somebody is trying to set dcdc3 range to (1250000, 1250000) uV
[ 2.003250] but we keep dcdc3 = 1250000 uV from the bootloader
[ 2.007538] axp20_buck3: 700 <--> 3500 mV at 1250 mV
[ 2.012464] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[ 2.022097] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[ 2.040277] axp20_ldo2: Failed to create debugfs directory
[ 2.043514] incomplete xfer (0x20)
[ 2.045768] incomplete xfer (0x20)
[ 2.048016] incomplete xfer (0x20)
[ 2.050262] incomplete xfer (0x20)
[ 2.052550] incomplete xfer (0x20)
[ 2.054802] incomplete xfer (0x20)
[ 2.057051] incomplete xfer (0x20)
[ 2.059300] incomplete xfer (0x20)
[ 2.061565] incomplete xfer (0x20)
[ 2.063904] incomplete xfer (0x20)
[ 2.066237] incomplete xfer (0x20)
[ 2.068570] incomplete xfer (0x20)
[ 2.070903] incomplete xfer (0x20)
[ 2.073248] incomplete xfer (0x20)
[ 2.075578] incomplete xfer (0x20)
[ 2.077908] incomplete xfer (0x20)
[ 2.080239] incomplete xfer (0x20)
[ 2.082701] incomplete xfer (0x20)
[ 2.085114] incomplete xfer (0x20)
[ 2.087477] incomplete xfer (0x20)
[ 2.089811] incomplete xfer (0x20)
[ 2.092170] incomplete xfer (0x20)
[ 2.094501] incomplete xfer (0x20)
[ 2.096832] incomplete xfer (0x20)
[ 2.099161] incomplete xfer (0x20)
[ 2.104725] usb 3-1: new high-speed USB device number 2 using sw-ehci
[ 2.106822] incomplete xfer (0x20)
[ 2.109157] incomplete xfer (0x20)
[ 2.113215] device-mapper: uevent: version 1.0.3
[ 2.121015] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.125973] device-mapper: multipath: version 1.3.2 loaded
[ 2.131458] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.137060] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 2.142627] device-mapper: multipath service-time: version 0.2.0 loaded
[ 2.146092] cpuidle: using governor ladder
[ 2.148973] cpuidle: using governor menu
[ 2.151300] [mmc-msg] sw_mci_init
[ 2.157061] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0
[ 2.162314] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 2.170604] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.178809] [mmc-msg] sdc0 Probe: base:0xf0576000 irq:64 sg_cpu:f0578000(4fc00000) ret 0.
[ 2.183382] [mmc_pm]: failed to fetch sdio card configuration!
[ 2.185923] sunxi_leds driver init
[ 2.191492] sunxi leds can't find script data '[leds_para]' 'leds_used'
[ 2.196493] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.201723] usbcore: registered new interface driver usbhid
[ 2.204547] usbhid: USB HID core driver
[ 2.207273] ashmem: initialized
[ 2.210906] logger: created 256K log 'log_main'
[ 2.214748] logger: created 256K log 'log_events'
[ 2.218465] logger: created 256K log 'log_radio'
[ 2.222244] logger: created 256K log 'log_system'
[ 2.229076] [SPDIF] [spdif_para] isn't defined or spdif_used=0
[ 2.231876] [I2S-0] Entered sunxi_i2s_init
[ 2.239672] [I2S-0] sunxi-i2s cannot find any using configuration for controllers, return directly!
[ 2.247419] [I2S-0] sndi2s cannot find any using configuration for controllers, return directly!
[ 2.250475] [I2S-0] Entered sunxi_sndi2s_init
[ 2.254004] IPv4 over IPv4 tunneling driver
[ 2.256935] TCP: bic registered
[ 2.259235] TCP: cubic registered
[ 2.261859] TCP: westwood registered
[ 2.264659] TCP: highspeed registered
[ 2.266953] TCP: hybla registered
[ 2.269137] TCP: htcp registered
[ 2.271407] TCP: vegas registered
[ 2.273624] TCP: veno registered
[ 2.276163] TCP: scalable registered
[ 2.278172] TCP: lp registered
[ 2.280355] TCP: yeah registered
[ 2.282946] TCP: illinois registered
[ 2.286190] Initializing XFRM netlink socket
[ 2.290243] NET: Registered protocol family 10
[ 2.295009] NET: Registered protocol family 17
[ 2.298444] NET: Registered protocol family 15
[ 2.303113] [mmc_pm]: No sdio card, please check your config !!
[ 2.306879] Registering the dns_resolver key type
[ 2.309035] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 2.317617] Registering SWP/SWPB emulation handler
[ 2.322239] axp20_buck2: Failed to create debugfs directory
[ 2.328434] [cpu_freq] INF:-------------------V-F Table-------------------
[ 2.333483] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
[ 2.338548] [cpu_freq] INF: voltage = 1400mv frequency = 912MHz
[ 2.343594] [cpu_freq] INF: voltage = 1300mv frequency = 864MHz
[ 2.349079] usb 1-1.3: new low-speed USB device number 3 using sw-ehci
[ 2.354137] [cpu_freq] INF: voltage = 1250mv frequency = 792MHz
[ 2.359324] [cpu_freq] INF: voltage = 1200mv frequency = 720MHz
[ 2.364416] [cpu_freq] INF: voltage = 1150mv frequency = 624MHz
[ 2.369462] [cpu_freq] INF: voltage = 1100mv frequency = 528MHz
[ 2.374520] [cpu_freq] INF: voltage = 1050mv frequency = 312MHz
[ 2.379566] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
[ 2.385456] [cpu_freq] INF:-----------------------------------------------
[ 2.395134] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz
[ 2.399098] registered taskstats version 1
[ 2.403730] I2C: i2c-3: HDMI I2C adapter
[ 2.430520] ParseEDID
[ 2.447535] EDID version: 1.3
[ 2.453801] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[ 2.457654] Using above mode as preferred EDID mode
[ 2.468163] Unimplemented SVD code 2
[ 2.470781] Unimplemented SVD code 22
[ 2.473425] Unimplemented SVD code 31
[ 2.475746] Reserved SVD code 101
[ 2.478386] Unimplemented SVD code 12
[ 2.484256] disp_clk: Could not find a matching pll-freq for 74200000 pclk
[ 2.490137] disp_clk: Could not find a matching pll-freq for 25150000 pclk
[ 2.496009] disp_clk: Could not find a matching pll-freq for 53900000 pclk
[ 2.501958] disp_clk: Could not find a matching pll-freq for 172900000 pclk
[ 2.507931] disp_clk: Could not find a matching pll-freq for 118650000 pclk
[ 2.513793] disp_clk: Could not find a matching pll-freq for 78800000 pclk
[ 2.519695] disp_clk: Could not find a matching pll-freq for 26150000 pclk
[ 2.524191] Parse_VideoData_Block: VIC 16 (native) support
[ 2.527795] Parse_VideoData_Block: VIC 5 support
[ 2.536914] input: PIXART USB OPTICAL MOUSE as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
[ 2.540515] Parse_VideoData_Block: VIC 4 support
[ 2.551372] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-sw-ehci-1.3/input0
[ 2.555016] Parse_VideoData_Block: VIC 3 support
[ 2.558627] Parse_VideoData_Block: VIC 2 support
[ 2.562224] Parse_VideoData_Block: VIC 7 support
[ 2.565902] Parse_VideoData_Block: VIC 22 support
[ 2.569473] Parse_VideoData_Block: VIC 1 support
[ 2.573179] Parse_VideoData_Block: VIC 20 support
[ 2.576837] Parse_VideoData_Block: VIC 31 support
[ 2.580493] Parse_VideoData_Block: VIC 18 support
[ 2.584162] Parse_VideoData_Block: VIC 19 support
[ 2.587637] Find HDMI Vendor Specific DataBlock
[ 2.593902] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP
[ 2.599803] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
[ 2.605673] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
[ 2.611158] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
[ 2.617857] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
[ 2.664784] usb 1-1.4: new low-speed USB device number 4 using sw-ehci
[ 2.808674] input: SIGMACHIP USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
[ 2.820297] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sw-ehci-1.4/input0
[ 2.833040] input: SIGMACHIP USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.1/input/input3
[ 2.844306] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sw-ehci-1.4/input1
[ 3.168211] [mmc-msg] mmc 0 detect change, present 1
[ 3.667263] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.669721] [mmc-msg] sdc0 power on
[ 3.697681] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.702604] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 3.774980] [mmc-err] smc 0 err, cmd 52, RTO
[ 3.779139] [mmc-err] smc 0 err, cmd 52, RTO
[ 3.787515] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.798306] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.803705] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.807775] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.811839] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.815930] [mmc-err] smc 0 err, cmd 5, RTO
[ 3.824965] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.833350] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.844124] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.880016] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.888506] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.893686] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[ 3.957250] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 3.961743] mmc0: new high speed SDHC card at address b368
[ 3.965908] mmcblk0: mmc0:b368 NCard 7.48 GiB
[ 3.969673] mmcblk0: p1
[ 4.071594] Console: switching to colour frame buffer device 240x67
[ 4.138254] axp20_buck3: incomplete constraints, leaving on
[ 4.143055] axp20_buck2: incomplete constraints, leaving on
[ 4.147825] axp20_ldo4: incomplete constraints, leaving on
[ 4.152537] axp20_ldo3: incomplete constraints, leaving on
[ 4.157274] axp20_ldo2: incomplete constraints, leaving on
[ 4.161984] axp20_ldo1: incomplete constraints, leaving on
[ 4.165088] console [netcon0] enabled
[ 4.168580] netconsole: network logging started
[ 4.172765] otg_wakelock_init: No USB transceiver found
[ 4.174890] ALSA device list:
[ 4.177941] #0: sunxi-CODEC Audio Codec
[ 4.181273] Freeing init memory: 224K
[ 4.267520] systemd-udevd[94]: starting version 215
[ 5.428376] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[ 5.914250] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 5.918946] systemd[1]: Detected architecture 'arm'.
[ 5.938088] systemd[1]: Set hostname to <pcduino3>.
[ 6.495978] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6.508369] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.515702] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.520607] systemd[1]: Expecting device dev-ttyS0.device...
[ 6.526367] systemd[1]: Starting Remote File Systems (Pre).
[ 6.532341] systemd[1]: Reached target Remote File Systems (Pre).
[ 6.539679] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.547163] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.550179] systemd[1]: Starting Paths.
[ 6.554431] systemd[1]: Reached target Paths.
[ 6.558489] systemd[1]: Starting Encrypted Volumes.
[ 6.563691] systemd[1]: Reached target Encrypted Volumes.
[ 6.571773] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.582052] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.585625] systemd[1]: Starting Root Slice.
[ 6.590336] systemd[1]: Created slice Root Slice.
[ 6.594887] systemd[1]: Starting User and Session Slice.
[ 6.600832] systemd[1]: Created slice User and Session Slice.
[ 6.605503] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.611393] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.617319] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.624439] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.629256] systemd[1]: Starting Journal Socket (/dev/log).
[ 6.635357] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.639637] systemd[1]: Starting udev Control Socket.
[ 6.645115] systemd[1]: Listening on udev Control Socket.
[ 6.649288] systemd[1]: Starting udev Kernel Socket.
[ 6.654598] systemd[1]: Listening on udev Kernel Socket.
[ 6.658437] systemd[1]: Starting Journal Socket.
[ 6.663517] systemd[1]: Listening on Journal Socket.
[ 6.667272] systemd[1]: Starting System Slice.
[ 6.672297] systemd[1]: Created slice System Slice.
[ 6.677749] systemd[1]: Started File System Check on Root Device.
[ 6.681864] systemd[1]: Starting system-getty.slice.
[ 6.687655] systemd[1]: Created slice system-getty.slice.
[ 6.692667] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 6.699332] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.704954] systemd[1]: Starting Increase datagram queue length...
[ 6.816252] systemd[1]: Starting Restore / save the current clock...
[ 6.838078] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.868156] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.872847] systemd[1]: Mounted Huge Pages File System.
[ 6.896393] systemd[1]: Starting Load Kernel Modules...
[ 6.919840] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.948685] systemd[1]: Mounting Debug File System...
[ 6.975301] systemd[1]: Starting udev Coldplug all Devices...
[ 6.998222] Bluetooth: Core ver 2.16
[ 7.001739] NET: Registered protocol family 31
[ 7.007166] Bluetooth: HCI device and connection manager initialized
[ 7.011014] Bluetooth: HCI socket layer initialized
[ 7.015083] Bluetooth: L2CAP socket layer initialized
[ 7.018961] Bluetooth: SCO socket layer initialized
[ 7.024587] systemd[1]: Starting LSB: Set keymap...
[ 7.035374] Bluetooth: HCI UART driver ver 2.2
[ 7.039262] Bluetooth: HCI H4 protocol initialized
[ 7.045717] Bluetooth: HCI BCSP protocol initialized
[ 7.049473] Bluetooth: HCILL protocol initialized
[ 7.053628] Bluetooth: HCIATH3K protocol initialized
[ 7.056625] systemd[1]: Starting Slices.
[ 7.074079] systemd[1]: Reached target Slices.
[ 7.087073] systemd[1]: Mounted Debug File System.
[ 7.094316] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.101955] Bluetooth: RFCOMM TTY layer initialized
[ 7.106315] Bluetooth: RFCOMM socket layer initialized
[ 7.109057] Bluetooth: RFCOMM ver 1.11
[ 7.122691] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 7.129363] systemd[1]: Started Increase datagram queue length.
[ 7.151558] input: sunxi-ir as /devices/virtual/input/input4
[ 7.158597] systemd[1]: Started Restore / save the current clock.
[ 7.161587] IR Initial OK
[ 7.175046] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.180446] UMP<2>: Inserting UMP device driver. Compiled: Sep 14 2016, time: 19:40:32
[ 7.188090] UMP<2>: dma_set_mask_and_coherent calling
[ 7.191972] UMP<2>: dma_set_mask_and_coherent result=-5
[ 7.195925] UMP<2>: dma_set_mask_and_coherent failed
[ 7.199627] UMP<2>: Using CMA memory backend, allocation limit: 134217728
[ 7.204958] UMP: UMP device driver loaded
[ 7.235417] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432)
[ 7.248320] systemd[1]: Started LSB: Set keymap.
[ 7.252257] mali: use config clk_div 1
[ 7.254054] mali: clk_div 1
[ 7.254612] Mali: mali clock set completed, clock is 312000000 Hz
[ 7.271002] systemd[1]: Time has been changed
[ 7.274098] mali: use config clk_div 1
[ 7.275879] mali: clk_div 1
[ 7.276440] Mali: mali clock set completed, clock is 312000000 Hz
[ 7.288259] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.299424] Mali: Mali device driver loaded
[ 7.340462] systemd[1]: Starting Syslog Socket.
[ 7.349521] systemd[1]: Listening on Syslog Socket.
[ 7.368862] systemd[1]: Starting Journal Service...
[ 7.393330] systemd[1]: Started Journal Service.
[ 7.715885] systemd-udevd[177]: starting version 215
[ 9.692020] 8192cu: disagrees about version of symbol module_layout
[ 10.463434] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[ 10.863808] Adding 131068k swap on /var/swap. Priority:-1 extents:1 across:131068k SS
[ 11.560451] systemd-journald[173]: Received request to flush runtime journal from PID 1
[ 16.973488] sunxi_emac sunxi_emac.0: eth0: link down
[ 16.980421] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.978169] Warning: this sunxi disp driver will see significant redesign.
[ 19.982965] Applications using /dev/disp directly will break.
[ 20.005733] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
[ 20.009041] [DISP] layer allocated: 0,101
[ 20.114830] [drm] Initialized drm 1.1.0 20060810
[ 20.127079] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 20.149396] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
[ 20.155197] Mali DRM initialize, driver name: mali_drm, version 2.1
[ 20.164745] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[ 20.196118] UMP<2>: New session opened
[ 21.821387] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 21.978120] sunxi_gmac: probed
[ 21.983526] eth1: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active
[ 21.991104] eth1: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01)
[ 28.037440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.041660] Bluetooth: BNEP filters: protocol multicast
[ 83.104990] usb 1-1.2: new high-speed USB device number 5 using sw-ehci
[ 83.241214] scsi1 : usb-storage 1-1.2:1.0
[ 84.867208] scsi 1:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4
[ 84.875700] sd 1:0:0:0: [sda] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[ 84.881077] sd 1:0:0:0: [sda] Write Protect is off
[ 84.885952] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 84.892251] sd 1:0:0:0: [sda] No Caching mode page found
[ 84.896522] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 84.901858] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 84.910843] sd 1:0:0:0: [sda] No Caching mode page found
[ 84.916027] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 84.918470] sda: sda1
[ 84.926464] sd 1:0:0:0: [sda] No Caching mode page found
[ 84.931516] sd 1:0:0:0: [sda] Assuming drive cache: write through
[ 84.936022] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 110.769693] usb 1-1.2: USB disconnect, device number 5
[ 146.844924] usb 1-1.2: new high-speed USB device number 6 using sw-ehci
[ 146.958472] scsi2 : usb-storage 1-1.2:1.0
[ 148.583819] scsi 2:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4
[ 148.594333] sd 2:0:0:0: [sda] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[ 148.599880] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 148.609422] sd 2:0:0:0: [sda] Write Protect is off
[ 148.613613] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 148.621063] sd 2:0:0:0: [sda] No Caching mode page found
[ 148.626192] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 148.635475] sd 2:0:0:0: [sda] No Caching mode page found
[ 148.640527] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 148.642962] sda: sda1
[ 148.655992] sd 2:0:0:0: [sda] No Caching mode page found
[ 148.661073] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 148.665791] sd 2:0:0:0: [sda] Attached SCSI removable disk