Hi All,
I'm using a rather old Armbian (wheezy) image on an Olimex Micro.
I've installed a lot of apps on it, so I don't want to be moving to a newer image.
I'm trying to copy my SD card image to NAND using the `nand-sata-install.sh` script that came with the image.
All goes well. The script partitions the NAND, reboots, installs all files and shuts down.
When I remove the SD card and power on, the board boots and everything is still alright.
Now, on subsequent poweroffs or reboots, the board does boot, but I doesn't connect to ethernet.
Boot logs from debug UART show that `proc` isn't mounted.
Error: /proc must be mounted
What could be the reasons for this?