Dear all,
I'm just trying to get a HummingBoard-Edge (i.MX6 Quad, 2GB) working with Armbian_5.20_Cubox-i_Ubuntu_xenial_4.7.3. Unfortunately, the board is recognized as CuBox-i, U-Boot loads the wrong dtb file (imx6q-cubox-i.dtb) and I have no access to the internal eMMC card (mmcblk1). By the way, it's the same issue with ArchLinuxArm.
Do I have to somehow modify the U-Boot environment variables to get the board being recognized as Hummingoard2? Do you have any other ideas?
Thank you very much for your help!
Best regards
Andreas
U-Boot 2013.10-rc4 (Aug 31 2016 - 17:35:12)
CPU: Freescale i.MX6Q rev1.5 at 792 MHz
Reset cause: WDOG
Board: MX6-CuBox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Hit any key to stop autoboot: 0